RECIRCULATING SPRAY GUN
view more images
Recirculating Spray - Gun Only - DI - PTFE - 1/2" FNPT Inlet Thread - TA-RC-103
The recirculating spray gun has a fluid path free of all undesirables such as o-rings, o-ring lubricants, metal springs or porous materials. Specially designed recirculating spray gun itself and all component parts coming into contact with the fluid are fabricated from high density TFE PTFE for total purity. In short there are no materials or objects in the fluid path to allow contamination.
When DI water enters the recirculating spray gun it travels up the “pressure” orifice into the point-of-use spray head chamber. Upon arrival and if the Recirc is not in use Dl water will travel back down the parallel “recirculation” orifice and eventually discharge to users Dl recovery or drain. By travelling this path bacterial growth is virtually eliminated as true recirculation exists.
RECIRCULATING SPRAY GUN SPECIFICATIONS
• Maximum operating pressure: 75 psi
• Media temperature range: 40ºF - 130°F
• Hand held
• PTFE and polyurethane
• PTFE fluid path
• Size: 2.5"W x 3.9"H
TA-RC-103 Recirculating Spray Gun with 1/2" FNPT Inlet Thread
For more options, visit our main Teflon Parts section.
Order online, call customer service at 303-752-0076 or email firstname.lastname@example.org