view more images
Heat Sealer - Table Top - Impulse - Medium Duty - Cutter - 16.5" Seal Length AV-421-MG
The heat sealer is designed for medium duty applications which would require sealing up to a few thousand polyethylene, polypropylene and other film laminates bags per day. This impulse heat sealer is equipped with a magnetic hold down device that ensures consistent seals independently of the operator. A special features of the heat sealer is that it can be operated by hand or with an optional foot pedal. Other models are motorized to automatically close the seal bars with the gentle push of the pedal. This heat sealer can work with pre-made bags or tubing. The machine can produce various lengths of bags by using the integrated cutter. Easy maintenance allows the seal bar to be replaced in less than a minute.
Sealing cycle is started by pushing down the seal bar or by using the optional foot pedal. The magnetic bars remain closed throughout the sealing and cooling cycle and then automatically open.
HEAT SEALER FEATURES
• Seal length: 16.5 inches
• Seal width: 1/8"
• Independent seal and cool timers
• Long life cutting blade
• Maximum film thickness (PE): 2 x 8 mil
• Electrical requirement: 115V
• 3 year limited warranty
HEAT SEALER OPTIONS
• Twin seal
• Code seal (text embossed in the seal)
• Stand with mechanical foot pedal (SP)
• Workshelf with bag support (OTST)
• Rolloflux table top roll holder for poly tubing (RL)
• Set of rollers for stand to hold poly tubing (SR)
• Electric foot pedal (MGM version)
• Stainless steel housing
HEAT SEALER TYPES OF SEALS
• Standard Seal: 3 mm wide
• Twin Seal #MG(M)T: Two parallel sealing bars with the cutter slicing the film between the two sealing bars. The second seal bar can be switched off allowing the machine to be used with a single seal.
• Industrial Seal #MGMI: 5 mm wide, sealing wire is fastened with tensioners to prevent distortion
• Bi-active #MGMDIS: Two sealing bars, one in the arm and one in the machine. Provides a more powerful seal which can seal thick films up to 2 x 0.25 mm.
HEAT SEALER MODELS
Sealmaster Magneta 321 – 12.5″ seal length
Sealmaster Magneta 421 – 16.5″ seal length - This Model
AV-421-MG – standard
AV-421-MGM – motorized operation
AV-421-MGT – twin seal
AV-421-MGS – stainless steel
Sealmaster Magneta 621 – 24.5″ seal length
AV-621-MG – standard
AV-621-MGM – motorized operation
AV-621-MGT – twin seal
AV-621-MGS – stainless steel
Sealmaster Magneta 821 – 32″ seal length
AV-821-MGM -motorized operation
Sealmaster Magneta 1021 – 40″ seal length
AV-1021-MGM -motorized operation
For more options, visit our main Heat Sealers section.