view more images
Cleanroom Filters - HEPA Filter AC Unit - Mounts on Top of FFU - 2 Tons
The Series of HVAC products from HEPAir is the only fully integrated modular environmental systems specifically designed and manufactured for the general cleanroom industry. The cleanroom AC units are intended for use in standard cleanroom environments such as pharmaceutical, medical device, electronics, packaging, aerospace, chemical, hospitals and laboratories.
These AC units are inteded for temperature, humidity and pressure control and are offered in both standard or customized systems ranging in size from 1/2 ton to 25 tons in capacity. The 2 ton independent air conditioning unit can mount on top of a fan filter unit or be connect from 10" collars on each side of the unit. Each air conditioning unit can be connected to one or two filters. If mounted to two filters an expected temperature drop inside the cleanroom will be approximately 10 to 12 degrees lower than the ambient outside of the cleanroom. For example, if there are four FFU's in the cleanroom and the ambient temperature outside of the cleanroom is 75 degrees. Two filters will blow 75 degree air into the cleanroom and two filters will blow 65 degree air. If ducting to filters a bottom plate will need to be ordered.
The HEPAir® horizontal series can be mounted directly or remotely to most manufacturers' fan filters for process level control of temperature and humidity. Available in 1/2 ton to 2 ton capacities. The AC units can be quickly installed, relocated or added on to. Its multi-panel design allows for variable duct connections making it ideal for plenum, once-through and re-circulating installations used in soft-wall cleanrooms, upgrades, problematic areas, additions, spot cooling, and process isolators applications. The HEPAir's lightweight, all-aluminum outer body features a self-contained design that is factory tested prior to shipment under process load conditions and is ETL and CSA approved. Mechanical components are accessible from the front or through removable access panels for ease of start-up and maintenance. Options include: air-or-water cooled condensers; integral HEPA filtration, chemical filtration and UV lighting; PID control; and duct collars.
• Unit weight - 250 lbs
• Electrical - Single phase
• 19 Full Load Amps
* Self contained air cooled or integral water cooled condensers.
* Integral stainless steel humidification
* PID Temperature and/or Humidity control
* High static pressure plug fan
* Integral HEPA filtration, UV lighting, and Chemical filtration
* Electric Reheat
* Duct collars
* Bottom Plate
* Power Cord - 6ft long 208V-230V
* ASHRAE Prefilter and Frame (18"x20") - 2 Ton only
Sizes: 1/2 Ton, 1 Ton, and 2 Ton Units
HI-99H0005-03 HVAC 2 Ton Unit - 21,000 Btu/Hr, 208 vac, Single Phase, 60 Hz, Air Cooled Condenser. Does not include HEPA filter fan unit