Cart (cart is empty) | Wish List | Your Account (not logged in)

CLEANROOM AIR SHOWERS
CLEANROOM AIR SHOWERS

Painted Metal, Low Profile, CAP-701LP-ST-4972-ES
Product Code: CAP-701LP-ST-4972-ES
List Price: $0.00
Price: $0.00
Quantity:
Click to print this product
Air Showers - Painted Metal - Low Profile

Cleanroom air showers serve to protect your cleanroom environment from unwanted contamination.  Air showers can greatly enhance your cleanroom's performance by removing surface contamination from clothing and cleanroom garments. Gowning/changing room areas are the interface between a dirty "street clothes" environment and a clean room environment. Unfortunately, the changing or gowning process itself releases contaminants from street clothes that can settle onto the "clean" garments.  Air showers blow off and remove much of this contamination preventing it from entering the clean space.

The cleanroom air shower is constructed using heavy gage painted steel (no particle board) to minimize particle generation.  The air shower has a knock-down design that allows ease-of-installation and flexibility in use. The air shower can be shipped knowcked down or completely assembled. When it is shipped knock-down all parts fit through a standard door.  All service to the blower, motor and filters is done from inside the air shower. The unit also offers an optional design that allows all the installation assembly to be done inside the air shower.

CLEANROOM AIR SHOWER LOW PROFILE OPTION
The Series 701LP has an overall assembled height of 95 inches.  The unit has the blower assembly, HEPA filter, and electrical components mounted on the side to permit the lower height.  It can be assembled in a space 96" high, making it ideal for retrofits or areas where penetrating the ceiling is undesirable.  The unit is shipped disassembled to the point that all parts will fit through a standard doorway.  Service access to the blower assembly, filters and electrical components is through two doors on each end of the unit. 

CLEANROOM AIR SHOWER GENERAL OPERATIONS
The air shower produces high pressure air, filters this air through a HEPA/ULPA filter, then flows the air through adjustable nozzles which exit at a high velocity. The air is then recirculated back to the high pressure blower, where it is prefiltered then HEPA/ULPA filtered and ducted back to the adjustable high velocity cleaning nozzles. The Series 701 provides approximately 1900 CFM total. With this high air flow volume (power) and the high nozzle velocity (force), the people inside the air shower are cleaned faster and more effectively. There are 32 adjustable air nozzles in each standard air shower section - 16 per side. The nozzles are aluminum with a clear anodized finish. They have a 1.2 inch inside diameter, with approximately 7800 LFPM (9000 LFPM peak) nozzle velocity.

CLEANROOM AIR SHOWER MICROPROCESSOR CONTROLLER AND DOOR START SWITCH
A microprocessor controls the starting of the air shower so that the unit will only start when people are going through in one direction. On applications where there is bi-directional travel through the air shower (people using the shower to both enter and exit the cleanroom) the air shower only starts when people are going into the cleanroom, not when they are leaving.
The cleaning time sequence is field adjustable by turning a potentiometer
on the face of the controller. There is one knob for adjusting the cleaning time, 0-180 second and a second know for controlling the purge or "wait time" (the time after the cleaning cycle ends and the door unlock allowing exiting of the air shower). The wait time is adjustable from 0 10 15 seconds.

Pictured Air Shower Options:
•  Straight Thru
•  Low Profile
•  Single Door
•  External Mount Magnetic Interlocks

There are many options which can be designed into the air shower. Please
call to discuss your requirements

For more options, visit our main Cleanroom Air Shower section.

If shipping collect, add your freight account number in the "Comments Box" when checking out.