Cart (cart is empty) | Wish List | Your Account (not logged in)

CHEMICAL SUITS
CHEMICAL SUITS

Kappler Zytron 200 Increased Resistance, Totally Encapsulating Level B, KA-Z2B371-4X
Product Code: KA-Z2B371-4X
List Price: $498.02
Price: $415.02
Quantity:
Click to print this product
Chemical Suits - Kappler Zytron 200  Increased Resistance - Totally Encapsulating Level B
Zytron 200 ups the protection level through increased resistance to a wider range of chemicals and greater physical strength – especially valuable in applications where rip-out is a concern. Color is Gray
Kappler Zytron 200 Chemical Suit, Totally Encapsulating Level B, Rear Entry Suit, Flat Back with Side Air Inlet, Bound or Heat Sealed/Taped Seams, Gray 
Large-View PVC Face Shield, 1 Exhaust Port, Elastic Wrists, Attached Sock Boots with Boot Flap, Double Storm Flap with Hook and Loop Closure, Cloth Zipper
KA-Z2B371-S            Bound Seams         Small         6/case
KA-Z2B371-LG/XL                                Large/XL
KA-Z2B371-2X/3X                                   2X/3X
KA-Z2B371-4X                                              4X

KA-Z2H371-SM/MD    Heat Sealed/Taped Seams     Small/Medium     6/case
KA-Z2H371-LG/XL                                                             Large/XL
KA-Z2H371-2X/3X                                                                 2X/3X
KA-Z2H371-4X                                                                           4X

 

KAPPLER TECHNICAL DATA
ASTM F1001 Chemical Test Battery
CHEMICAL
Zytron®
200
Acetone
17
Acetonitrile
52
Carbon Disulfide
2
Dichloromethane
2
Diethylamine
21
Dimethylformamide
77
Ethyl Acetate
14
n-Hexane
7
Methyl Alcohol
>480
Nitrobenzene
97
Sodium Hydroxide
>480
Sulfuric Acid
>480
Tetrachloroethylene
21
Tetrahydrofuran
3
Toluene
6
GASES
 
Ammonia Gas
NT
1,3 Butadiene
NT
Chlorine Gas
NT
Ethylene Oxide Gas
NT
Hydrogen Chloride Gas
NT
Methyl Chloride Gas
NT
Typical Physical Properties
(measured per ASTM D751)
TEST METHOD
Zytron®
200
Grab Tensile Strength MD*
52 / 231
Grab Tensile Strength CD*
39 / 173
Tear Resistance MD*
22.9 / 101.8
Trapezoid Method CD*
9.6 / 42.7
Ball Burst
43 / 191

Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions.

NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.

WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards.

CAUTION: Do not use for fire protection.
Avoid open flame or intense heat.

*MD - Machine Direction, CD - Cross Direction

 

For more options, visit the main Cleanroom Garment section.