Chemical Suits - Kappler Zytron 200 Increased Resistance - Coverall with Attached Hood - Elastic Wrist/Ankles
Zytron 200 ups the protection level through increased resistance to a wider range of chemicals and greater physical strength – especially valuable in applications where rip-out is a concern. Color is Gray
Available Styles: * Plain, elastic wrists/ankles, and attached hoods and/or boots * Hooded styles include elastic face opening with extended chin protection * Seams are available Serged, or Bound for additional protection * Bound seam styles include storm flap with pressure sensitive tape closure
KA-Z2H428-XS Heat Sealed/Taped Seams Extra Small 6/case CE Certified Type 3 KA-Z2H428-SM/MD Small/Medium KA-Z2H428-LG/XL Large/XL KA-Z2H428-2X/3X 2X/3X KA-Z2H428-4X 4X
KAPPLER TECHNICAL DATA ASTM F1001 Chemical Test Battery
Ethylene Oxide Gas
Hydrogen Chloride Gas
Methyl Chloride Gas
Typical Physical Properties (measured per ASTM D751)
Grab Tensile Strength MD*
52 / 231
Grab Tensile Strength CD*
39 / 173
Tear Resistance MD*
22.9 / 101.8
Trapezoid Method CD*
9.6 / 42.7
43 / 191
Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions.
NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.
WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards.
CAUTION: Do not use for fire protection. Avoid open flame or intense heat.