Zytron 200 ups the protection level through increased resistance to a wider range of chemicals and greater physical strength – especially valuable in applications where rip-out is a concern. Color is Gray
SEAM TYPES The best protective garments in the world are useless without strong, tight seams. Just one loose thread or gap, and the barrier of protection can unravel and leave you vulnerable to injury - or worse. Kappler offers four different seam types for its protective garments. Depending on the fabric and final application, users may specify: • Serged seams for general protection • Bound seams in the mid-range • Heat Sealed/Taped seams for high-end chemical protection • Ultrasonic seams for biohazard or nuclear applications
SPECIAL FEATURE Zytron ChemScan™ garment label is on the front of each garment. Scan the label with your mobile phone's QR reader for immediate access to a complete list of chemicals tested against your garment's protective fabric. Quick, accurate and only from Kappler.
Available Styles: * Plain, elastic wrists/ankles, and attached hoods and/or boots * Hooded styles include elastic face opening with extended chin protection * Seams are available Serged, or Bound for additional protection * Bound seam styles include storm flap with pressure sensitive tape closure
KA-Z2H414-XS Heat Sealed/Taped Seams Extra Small 6/case KA-Z2H414-SM/MD Small/Medium KA-Z2H414-LG/XL Large/XL KA-Z2H414-2X/3X 2X/3X KA-Z2H414-4X 4X
KAPPLER TECHNICAL DATA ASTM F1001 Chemical Test Battery
Ethylene Oxide Gas
Hydrogen Chloride Gas
Methyl Chloride Gas
Typical Physical Properties (measured per ASTM D751)
Grab Tensile Strength MD*
52 / 231
Grab Tensile Strength CD*
39 / 173
Tear Resistance MD*
22.9 / 101.8
Trapezoid Method CD*
9.6 / 42.7
43 / 191
Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions.
NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.
WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards.
CAUTION: Do not use for fire protection. Avoid open flame or intense heat.