Chemical Suit - Kappler Zytron 100XP - Stronger Properties - Coverall - Serged Seams - Blue - Size: XS KA-Z1S412XP-XS
Zytron 100XP is a new, tougher version of Z100 – the same excellent chemical holdout with stronger physical properties. These garments are ideal where workers need protection from dry particulates or light chemical splash, and where the physical demands may be greater – the tough fabric facilitates productive work sessions. Color is Blue.
SEAM TYPES The best protective garments in the world are useless without strong, tight seams. Just one loose thread or gap, and the barrier of protection can unravel and leave you vulnerable to injury - or worse. Kappler offers four different seam types for its protective garments. Depending on the fabric and final application, users may specify: • Serged seams for general protection • Bound seams in the mid-range • Heat Sealed/Taped seams for high-end chemical protection • Ultrasonic seams for biohazard or nuclear applications
SPECIAL FEATURE Zytron ChemScan™ garment label is on the front of each garment. Scan the label with your mobile phone's QR reader for immediate access to a complete list of chemicals tested against your garment's protective fabric. Quick, accurate and only from Kappler.
Available Styles: * Plain, elastic wrists/ankles, and attached hoods and/or boots * Hooded styles include elastic face opening with extended chin protection * Seams are available Serged, or Bound for additional protection * Bound seam styles include storm flap with pressure sensitive tape closure
Kappler Zytron 100XP Coverall, Zipper Front, Collar, Serged or Bound Seams, Blue 12/case KA-Z1S412XP-XS Serged Seams Extra Small KA-Z1S412XP-SM/MD Small/Medium KA-Z1S412XP-LG/XL Large/XL KA-Z1S412XP-2X/3X 2X/3X KA-Z1S412XP-4X 4X
KA-Z1B412XP-XS Bound Seams Extra Small KA-Z1B412XP-SM/MD Small/Medium KA-Z1B412XP-LG/XL Large/XL KA-Z1B412XP-2X/3X 2X/3X KA-Z1B412XP-4X 4X
Order Sizes Below
KAPPLER TECHNICAL DATA ASTM F1001 Chemical Test Battery
Ethylene Oxide Gas
Hydrogen Chloride Gas
Methyl Chloride Gas
Typical Physical Properties (measured per ASTM D751)
Grab Tensile Strength MD*
49 / 217
Grab Tensile Strength CD*
38 / 169
Tear Resistance MD*
17.4 / 77
Trapezoid Method CD*
10.3 / 45
46 / 204
Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions.
NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.
WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards.
CAUTION: Do not use for fire protection. Avoid open flame or intense heat.