Air Showers, ADA Compliant Straight Through, CAP-701KD-7372-G175

Air Showers  - ADA Compliant - Straight Through  CAP-701KD-ST-7372-G175

The cleanroom air showers serve to protect your cleanroom environment from unwanted contamination. The clean garment s become contaminated during the gowning/ungowning process, and because of high traffic in the gowning area. The contamination problem is amplified when the same garment is worn several times or is taken on and off numberous times during the day.  The Air shower is a fast and effective method of removing this surface contamination which will otherwise be carried directly to your cleanroom.

The cleanroom air shower is constructed using heavy gage painted steel (no particle board) to minimize particle generation. The air shower provides air flow of approximatgely 1900 CFM through 32 adjustable nozzles yielding a 7800 LFPM nozzle air velocity with optional 9100 nozzle velocities.

The air shower has a knock-down design that allows ease-of-installation and flexibility in use. The air shower can be shipped knocked down or completely assembled. When it is shipped knock-down all parts fit through a standard door. All service to the blower, motor and filters is done from inside the air shower. The unit also offers an optional design that allows all the installation assembly to be done inside the air shower.

The air shower produces high pressure air, filters this air through a HEPA/ULPA filter, then flows the air through adjustable nozzles which exit at a high velocity. This high velocity air removes surface particles and also flaps the garments to dislodge more firmly attached particles. After cleaning the air is recirculated back to the high pressure blower, where it is prefiltered, then HEPA/ULPA filtered and ducted back to the adjustable cleaning nozzles.

AIR SHOWER GENERAL FEATURES
•  Durable and cleanroom approved painted cold rolled steel shell
•  No silicone used - only low outgssing epoxy or urethane sealant
•  (2) anodized aluminum framed safety glass doors with hydraulic door closers
•  (1) LED recessed light fixture with wall switch
•  (2) removable high pressure interior nozzle wall panels
•  (1) 5HP (3.7kW), 3600 RPM sealed ball bearing continuous duty motor (motor meets or exceeds US EP Act and NRCan Canadian efficiency standards)
•  (1) superior efficiency direct drive aluminum air foil wheel 
•  7800 FPM (39.62 m/s) average nozzle velocity
•  1900 CFM (0.9 m3/s) Average
•  (1) 24x24x11.5, 99.97% HEPA filter
•  (4) wall return air grills with 10x20x1 MERV 8 Prefilters
•  (1) 2½ inch diameter sprinkler sleeve
•  Programmable microprocessor PLC with 0-30 second adjustable run time and 0-10 second adjustable wait time
•  UL508A panel sticker
•  CSA Listed (selected models)
•  208 Volt, 60 Hz, 3 Phase, 4 wire, 14.5 FLA

AIR SHOWER OUTSIDE WIDTH OPTIONS
•  50 inch (36 inch single doors) (standard)
•  56 inch (42 inch single doors
•  62 inch (48 inch single doors)

AIR SHOWER DEPTH OPTIONS
•  54 inch (standard)
•  72 inch 

AIR SHOWER NOZZLE OPTIONS
•  Fixed nozzles 
•  Concentrated wall nozzle pattern 
•  Air knife design 
•  Rub rail nozzle protection 
•  Wall point ionization system 

AIR SHOWER GENERAL OPTIONS
•  Raised floor return
•  Hazardous location design
•  Type 304 #4 finish stainless steel pharmaceutical package

AIR SHOWER FILTER OPTIONS
•  ULPA upgrade to 99.999% on 0.12 micron particles 
•  Additional pre-filter on blower
•  Magnehelic gauge - single
•  Magnehelic gauge - dual

AIR SHOWER SHELL OPTIONS
•  Powder coated painted cold rolled steel (standard white) (standard)
•  Powder coated paiinted cold rolled steel (customer specified)
•  Type 304 #4 finish stainless steel walls and cabinet
•  Type 316L 2b finish stainless steel walls and cabinet

AIR SHOWER DOOR OPTIONS
•  Steel construction painted
•  Stainless steel construction
•  Acrylic panel - full
•  Split panel design - safety glass/ stainless steel
•  Split panel design - acrylic/ stainless steel
•  Door rub rails
•  Magnetic interlocks -external mount
•  Magnetic interlocks - internal mount
•  Door sweeps - fixed
•  Automatic door sweeps

Options on the Pictured Air Shower
•  Power Door Openers
•  Internal Mount Magnetic Interlocks
•  Minihelic gauge - Single
•  White Painted Steel

Product Code: CAP-701KD-ST-7372-G175   Air Showers, ADA Compliant, Straight Through, Single Section, 71"W x 72"L x 116"H, 16 GA Powder Coat painted steel construction, 7800 LFPM Nozzle velocity, 32 adjustable nozzles, 1900 CFM, Magnetic interlocks, 5HP Motor three phase, interior light, prefilters, ships knocked down, Power 14 amps @ 208 three phase (2) 3'0" x 7'0" doors

For more options, visit our main section for cleanroom air showers.

TO ORDER AIR SHOWERS
To order the air showers, you can click above, call customer service at (303)752-0076 or email sales@cleanroomworld.com 

Shipping Instructions: The air shower price does not include freight. The air shower ships on a motor freight carrier and the cost of shipping will be added to your order. Customer service will call or email you after the order is placed to give you the option of shipping the air shower collect on your account.  Indicate to customer service if your facility will require a lift gate or if you have a dock high receiving area. Please include delivery point of contact name and phone number. 

In addition to air showers, we also offer a variety of other cleanroom equipment, including motorized shoe cleaners, Particle counters, and modular cleanrooms.

22223DR